The SmallRig Super Clamp is a compact way to attach compatible camera accessories to a range of surfaces, from crossbars and shelves to hooks and plate glass.
This SmallRig Super Clamp review looks at its adjustable jaw, threaded accessory points, and the practical limits to check before choosing it for a rig.
SmallRig Super Clamp Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact clamp for camera creators who need to attach compatible gear to rods, shelves, bars, or other surfaces within its jaw range.
- Adjustable jaw opens to about 40 mm and closes to a minimum of 15 mm.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for accessory connections.
- Made from aluminum alloy and stainless steel.
- Rubber pads on the clamp parts are designed to help prevent slipping and scratching.
Pros
- The jaw range accommodates a variety of surfaces when their thickness falls within the stated limits.
- Both 1/4-inch and 3/8-inch thread options support different accessory connections.
Consider before buying
- The 15–40 mm jaw range rules out surfaces that are thinner or thicker than its working range.
- No articulating arm or ball head is included, so some setups will need an additional mounting piece.
Read the full review summary
This clamp combines a jaw that opens from 15 mm to about 40 mm with 1/4-inch and 3/8-inch threaded holes for attaching accessories.
Its aluminum alloy and stainless steel construction, plus rubber pads on the clamp surfaces, make it a straightforward mounting piece for setups that need to grip a suitable edge or bar.
It is best suited to creators who already know where they plan to mount it and have checked that the surface falls within the jaw range.
The compact clamp itself does not include an arm or ball head, so buyers should confirm that their accessory can connect directly to the threaded holes or plan for a separate compatible attachment.
The buying factors
SmallRig Super Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
It can clamp onto several types of surfaces and includes both 1/4-inch and 3/8-inch threaded holes for accessories.
Jaw range
The stated opening range is useful for many compact supports, but the surface must be at least 15 mm and less than 40 mm thick.
Accessory connections
Two thread sizes expand connection options, though an articulating arm or ball head is not included.
Grip protection
Rubber pads are intended to help reduce slipping and scratching where the clamp contacts a surface.
Build materials
Aluminum alloy and stainless steel offer a sturdy-feeling material combination for a small rig component.
Ready-to-use versatility
The clamp is a useful base mount, but the right accessory and a suitable mounting surface are needed for each setup.
Key Features and Specifications of SmallRig Super Clamp
- Adjustable jaw opens to about 40 mm and closes to a minimum of 15 mm.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for accessory connections.
- Made from aluminum alloy and stainless steel.
- Rubber pads on the clamp parts are designed to help prevent slipping and scratching.
- Compact, black clamp supplied as a single item.
- Listed for mounting items such as cameras, lights, umbrellas, hooks, shelves, plate glass, and crossbars.
Pros and Cons of SmallRig Super Clamp
Pros
- The jaw range accommodates a variety of surfaces when their thickness falls within the stated limits.
- Both 1/4-inch and 3/8-inch thread options support different accessory connections.
- Rubber contact pads can help protect the clamped surface and improve grip.
- Aluminum alloy and stainless steel keep the design focused on durable mounting hardware.
Consider before buying
- The 15–40 mm jaw range rules out surfaces that are thinner or thicker than its working range.
- No articulating arm or ball head is included, so some setups will need an additional mounting piece.
- Buyers should confirm that their camera accessory uses a compatible thread and that its mounting position works directly on the clamp.
Who Should Buy SmallRig Super Clamp?
Good fit
Consider the SmallRig Super Clamp if your rig needs a compact grip point on a shelf edge, crossbar, hook, or another suitable surface.
The combination of adjustable jaws and two thread sizes makes it adaptable to different accessory layouts without requiring a dedicated mounting plate for every location.
Before buying, measure the intended clamping surface and check the attachment point on your accessory. If both fit the clamp’s range and threaded connections, it can serve as a simple foundation for a small camera or lighting setup.
Who should skip it
Look elsewhere if the mounting surface is outside the 15–40 mm jaw range, or if your intended position needs an included articulating arm or ball head.
Check the accessory’s thread and how it will sit once attached before building a rig around this clamp.
How the SmallRig Super Clamp Fits a Camera Rig
Check the jaw against the mounting surface
The jaw’s stated range is the first practical filter: the surface must be at least 15 mm thick and no more than about 40 mm.
Measuring the exact spot matters because a nearby edge or tube can have a different profile from the section you intend to grip.
Plan the accessory connection
The 1/4-inch and 3/8-inch threaded holes allow direct attachment of compatible accessories, but the clamp does not supply an arm to reposition them.
If the accessory needs to sit away from the clamped point or at a particular angle, check whether you already have a suitable arm or ball head.
Consider the contact surfaces
Rubber pads are designed to reduce slipping and scratching at the clamp’s contact points.
For a delicate or unusually smooth surface, consider where the pads will press and whether the clamp can sit securely without interfering with the intended setup.
Keep the load and setup in view
The product details list a maximum weight recommendation of 3.3 pounds. Treat that figure as a ceiling to check against the complete accessory setup, and consider how the clamp will be oriented and supported before attaching equipment.
Alternatives to SmallRig Super Clamp
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount
Choose the main clamp if you want a simpler base with two thread sizes and already have the accessory hardware you need.
The double ball head model is a closer fit when you want an included adjustable head and action camera adapter, while its stated maximum load is a different limit to assess for your setup.
- This alternative combines a clamp with a double ball head, a 1/4-inch-20 screw, and an action camera adapter.
- Its clamp is designed for rods, tubes, tables, or frames, and it is listed to support up to 1.5 kg.
- The SmallRig Super Clamp provides adjustable jaws and 1/4-inch and 3/8-inch threaded holes, but no ball head or action camera mount is included.
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit
The clamp kit suits buyers who need extra reach and angle adjustment in one package, and its wider jaw opening may fit some thicker supports.
Pick the standalone SmallRig Super Clamp when its smaller jaw range is sufficient and you prefer to choose the accessory connection separately.
- This kit pairs a super clamp with a 9.8-inch articulating arm, 1/4-inch screws at both ends, and dual 360-degree ball heads.
- The clamp opens from 15 mm to a maximum of 54 mm.
- The SmallRig Super Clamp is a standalone clamp with a maximum jaw opening of about 40 mm.
Is SmallRig Super Clamp Worth It?
The SmallRig Super Clamp is worth considering as a compact mounting base when your chosen surface fits its 15–40 mm jaw range and your accessory matches its threaded connections.
Its padded jaws and aluminum alloy and stainless steel construction make it a versatile component for a small camera rig.
Check the mount dimensions and the full accessory load before choosing it.
Buyers who need an adjustable arm or ball head should account for that extra hardware; otherwise, this clamp offers a straightforward way to add a mounting point where a compatible surface is available.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact clamp for camera creators who need to attach compatible gear to rods, shelves, bars, or other surfaces within its jaw range.
- Adjustable jaw opens to about 40 mm and closes to a minimum of 15 mm.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for accessory connections.
- Made from aluminum alloy and stainless steel.
- Rubber pads on the clamp parts are designed to help prevent slipping and scratching.