Product Reviews

SmallRig Cold Shoe Mount 2060 Review: A Simple Two-Pack for Camera Rigs

A practical fit for camera owners who need fixed cold shoe points on compatible cages, handles, plates, or other accessories.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Cold Shoe Mount review centers on a straightforward two-piece adapter for adding a shoe attachment point to compatible camera accessories.

Its threaded mounting options and included hardware make it useful for building out a cage or handle, provided the mounting surface and screws match your setup.

SmallRig Shoe Mount Review Summary

The quick verdict

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical fit for camera owners who need fixed cold shoe points on compatible cages, handles, plates, or other accessories.

  • Two cold shoe mounts are included in the package.
  • Each mount measures 25 × 25 mm (0.98 × 0.98 inches) and is made from aluminum alloy.
  • Compatible mounting surfaces include accessories with 1/4" or M2.5 threaded holes, such as cages, cold shoe blocks, handles, and plates.
  • The shoe can hold a microphone, flash, or LED accessory on a compatible camera accessory.

Pros

  • Two mounts provide a pair of shoe attachment points or a spare for another rig.
  • The 1/4"-20 and M2.5 hardware supports more than one compatible mounting arrangement.

Consider before buying

  • The fixed shoe does not provide the angle adjustment available from ball-head style mounts.
  • Compatibility depends on the threaded holes and cage design, so buyers should confirm the exact mounting interface.
Read the full review summary

SmallRig’s 2060 mount offers a compact way to attach a microphone, flash, or LED accessory to a cage, handle, plate, or other accessory with a compatible threaded hole.

The package includes two mounts, 1/4"-20 screws, M2.5 screws, and hex spanners, so it can support more than one mounting point or leave a spare for another rig.

The design prioritizes a fixed, low-profile shoe over adjustable positioning. White arrows indicate mounting direction, and bent bevels at one end are intended to help prevent accidental removal.

Check the exact threaded pattern and your cage model before ordering: the product is unsuitable for DJI and ZHIYUN gimbals, and the mounting instructions differ for most cages versus SmallRig Full Cage 1661.

The buying factors

SmallRig Shoe Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting flexibility

Supports mounting to compatible 1/4" or M2.5 threaded holes, with included hardware for those setups.

8/10

Accessory compatibility

Designed to hold common camera accessories such as microphones, flashes, and LED lights.

8/10

Installation clarity

Directional arrows and included hex spanners help make orientation and fastening more straightforward.

7/10

Security features

Two M2.5 screws and bent bevels provide retaining details, though the right mounting method depends on the accessory surface.

5/10

Positioning control

The shoe provides a fixed attachment point, with no angle adjustment described.

8/10

Package value

Two mounts and the corresponding screws and tools support multiple mounting points.

Key Features and Specifications of SmallRig Shoe Mount

  • Two cold shoe mounts are included in the package.
  • Each mount measures 25 × 25 mm (0.98 × 0.98 inches) and is made from aluminum alloy.
  • Compatible mounting surfaces include accessories with 1/4" or M2.5 threaded holes, such as cages, cold shoe blocks, handles, and plates.
  • The shoe can hold a microphone, flash, or LED accessory on a compatible camera accessory.
  • The package includes two 1/4"-20 screws, four M2.5 screws, and two hex spanners.
  • White arrows indicate mounting direction, and bent bevels at one end are designed to help prevent accidental removal.
  • For most cages, the mount attaches with the included 1/4"-20 screw; SmallRig Full Cage 1661 is the stated exception where M2.5 screws are needed.

Pros and Cons of SmallRig Shoe Mount

Pros

  • Two mounts provide a pair of shoe attachment points or a spare for another rig.
  • The 1/4"-20 and M2.5 hardware supports more than one compatible mounting arrangement.
  • Compact 25 mm square footprint can fit into a camera cage or handle layout.
  • Directional arrows, retaining bevels, and included hex spanners make the installation details easier to manage.

Consider before buying

  • The fixed shoe does not provide the angle adjustment available from ball-head style mounts.
  • Compatibility depends on the threaded holes and cage design, so buyers should confirm the exact mounting interface.
  • It is not suitable for DJI or ZHIYUN gimbals.

Who Should Buy SmallRig Shoe Mount?

Good fit

Choose the SmallRig Cold Shoe Mount 2060 if you need a simple shoe point on a camera cage, handle, plate, or another accessory with compatible 1/4" or M2.5 threaded holes.

It is especially convenient when you want two mounts in one package for a microphone and light, or for separate camera setups.

Before buying, check which screw your mounting surface requires and whether the shoe can be oriented as intended in the available space. For most cages, use the included 1/4"-20 screw; SmallRig Full Cage 1661 uses the M2.5 screws.

The arrows help identify direction, while the bent bevels provide a retaining feature at one end.

This is a sensible choice when the priority is adding a stable, fixed shoe attachment point with a small set of hardware.

If the accessory needs to tilt or change angle after installation, consider a mount with an adjustable head instead.

Who should skip it

Skip this mount if you need a position-adjustable arm for directing a light or monitor. Its described design is a fixed shoe mount.

Avoid it for DJI or ZHIYUN gimbals. For other rigs, verify the cage model and available threaded holes before choosing the screw and mounting location.

SmallRig Shoe Mount: What to Check Before You Build

Match the mount to the threaded surface

The 2060 is designed for accessories with either 1/4" or M2.5 threaded holes, but the correct screw depends on the specific cage or plate.

Most cages use the included 1/4"-20 screw; SmallRig Full Cage 1661 is the exception called out for M2.5 fastening. Confirm the interface first so the mount sits properly and the hardware is not forced.

A fixed shoe suits simple rig additions

This mount creates a place for a microphone, flash, or LED accessory without adding an articulated joint. That makes the design a good match when you already know where the accessory should sit.

If you need to change its angle during setup, an adjustable mount will better suit that workflow.

Two pieces expand a rig or leave a spare

The package contains two mounts and enough listed screws for installation, along with two hex spanners.

That can help when outfitting two compatible points, though each location still needs an appropriate threaded interface and enough clearance for the shoe and its retaining bevels.

Check gimbal compatibility carefully

The product is specifically identified as unsuitable for DJI and ZHIYUN gimbals.

For a camera cage or other accessory, check the exact model and mounting surface rather than relying on brand compatibility alone; the listed cage guidance distinguishes the Full Cage 1661 from other cages.

Alternatives to SmallRig Shoe Mount

Camera Flash Shoe Mounts alternative

SmallRig Double Ball Head Adapter with Shoe Mount 1135
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Adapter with Shoe Mount 1135

Choose the 2060 for simple fixed mounting and two shoe points. The 1135 is a better fit when you need to adjust accessory angle, while its stated weight guidance should inform the load you plan to attach.

  • The 1135 combines a cold shoe and 1/4" screw with a double ball head that rotates up to 180 degrees and locks with a side wingnut.
  • Its maximum weight recommendation is 1 kg, and the product advises against using it with a monitor or LED light over 1 kg.
  • The 2060 is a fixed shoe mount supplied as a two-piece pack, with 1/4"-20 and M2.5 mounting hardware.

Camera Flash Shoe Mounts alternative

SmallRig Mini Ball Head Cold Shoe Mount Adapter 3577
4.5/5

700+ ratings

Read Amazon Reviews

SmallRig Mini Ball Head Cold Shoe Mount Adapter 3577

Pick the 3577 if you need a light, compact mount with tilt adjustment and your accessory stays within its 250 g support limit.

The 2060 better suits buyers who want two fixed shoe mounts and need the included threaded hardware for their setup.

  • The 3577 is a mini ball-head mount that tilts up to 138 degrees, weighs 20 g, and supports devices up to 250 g.
  • It has a 1/4" screw on top and a cold shoe adapter at its base, with toolless installation described for attaching the base to a camera or cage.
  • The 2060 provides a fixed shoe and includes two mounts, with screws for compatible threaded cage or accessory surfaces.

Is SmallRig Shoe Mount Worth It?

The SmallRig Cold Shoe Mount 2060 is worth considering for camera owners who need one or two compact, fixed shoe points on compatible cages, handles, or plates.

The two-mount package, threaded hardware, and directional markings make it a practical rig-building option.

Check the threaded interface and cage-specific screw guidance before buying, and avoid it for DJI or ZHIYUN gimbals. If flexible positioning matters more than a fixed attachment point, choose an adjustable mount instead.

Your review at a glance

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical fit for camera owners who need fixed cold shoe points on compatible cages, handles, plates, or other accessories.

  • Two cold shoe mounts are included in the package.
  • Each mount measures 25 × 25 mm (0.98 × 0.98 inches) and is made from aluminum alloy.
  • Compatible mounting surfaces include accessories with 1/4" or M2.5 threaded holes, such as cages, cold shoe blocks, handles, and plates.
  • The shoe can hold a microphone, flash, or LED accessory on a compatible camera accessory.

Written by

acrossandabroad.com Editorial Team

Editorial team

acrossandabroad.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Cold Shoe Mount 2060

SmallRig Cold Shoe Mount 2060

A practical fit for camera owners who need fixed cold shoe points on compatible cages, handles, plates, or other accessories.

  • Two cold shoe mounts are included in the package.
  • Each mount measures 25 × 25 mm (0.98 × 0.98 inches) and is made from aluminum alloy.
Check Video Reviews on Amazon